Quickmount II:
The McCain Quickmount II is a low profile, two-piece, die
cast aluminum pedestrian/vehicle signal mounting device. The
Quickmount II provides the user with a mount that is bi-directional
(left or right of pole) and easy to install. One person can
easily install and remove the Quickmount II without the use
of heavy equipment. This unit was designed to facilitate original
installation and maintenance.
Construction:
The housing is die cast from special aluminum alloy. It has
two bosses integrally cast for mounting of the terminal
block. The pole mounting surface is designed
to fit a wide range of poles from a 4 inch diameter
minimum. Two horizontally elongated holes are
cast in to accept 1/2 inch diameter through bolts.
The elongated holes will allow the unit to
be rotated up to 15 degrees in either direction from
center, creating a wide field of adjustment.
As an alternate means of attachment the unit has
integrally cast tabs at each end to allow the
unit to be banded to the pole, thus providing
virtually unlimited adjustment.
Click Here for a Printable Spec. Sheet